Best sellers

Hex key with ball end. 3/16". 26x150mm.

Long-reach snipe nose pliers, bent 45°

Professional strength stainless steel blade channel secures blade for the toughest of cutting jobs

6 edge 8-9-10-12-14-16-17-5/16"-3/8"-1/2". Square 7-8-10-11-12-13-14-5/16"-3/8" 1/2". Triangle XT-10. Indv XS-10. Spline M16H with hole. Torx 45.

Combination wrench with an open end head and ring head. 50mm.

Hollow punch. 54mm.

Slot 1,0x5,5x400mm. Total length 500mm.

Crowring key 3/8" x 13mm.

Hollow punch. 30mm.

Crimps male fitting end to connect guttering, downspouts or metal pipe

OLFA 18mm Snap-Off Heavy-Duty Knife Blade, 50-Pack

Parallel pin punch. 5mm. Pin depth 80mm. Long.

Practical sturdy tool bag in heavy polyester, reinforced stitches around the edges and on all pockets. Inside, the bag is divided into two large rooms, where there is in each room additional dividing space for various tools. Outside, there is also a good possibility of storing the tool with four smaller front pockets, two spacious pockets at each end with a practical metal hanger on the right side of the bag. The back piece is equipped with two smaller and one large space. Fixed hanger with foam handle and detachable support frame gives the user the best prerequisites for transporting the tool. Outside dimensions: Height with handle 26cm. Length 40cm. Width 22.5cm

Parallel pin punch. 4mm. Pin depth 70mm. Long.

PH000 x 50mm.

Digital vernier caliper 150mm.

Adapter set, 1/4"Fx3/8"m. 3/8"Fx1/4"M. - 3/8"Fx1/2"M. - 1/2"Fx3/8"M. - 1/2"Fx3/4"M. - 3/4"Fx1/2"M. Socket holder 1/4" 3/8" 1/2", bit holder 1/4"x1/4" - 3/8"x5/16" - 1/2"x3/8". Plastic box.

Stainless Steel Slide-Lock Utility Knife

Combination wrench with an open end head and a 15° ring head. 13mm. Passed the DIN 3113 standards.

1/4" x 50 mm long. S3 Torsion packet of 5.

1/4" x 50 mm long. Packet of 10.

Allen socket short 1/2" x 7/16" 6 edge.

Combination wrench with an open end head and a 15° ring head. 1/4”. Passed the DIN 3113 standards.